• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 123 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-CC26X2R1: packet sniffer 2

ANMOL ANMOL
Prodigy 10 points
Part Number: LAUNCHXL-CC26X2R1

packet sniffer2 

radio configuration does not have the option to choose the channel 0-36 to get the data packet , same in packet sniffer 1 

i want to get the data packet ble but the channels are 37 38 39 only , i can't select other then one 

these three only shows advertising packets in the Wireshark , not the data at all

  • 0
    TI__Mastermind 25810 points

    Hello Anmol,

    Unfortunately, you are only able to select the advertisement channels. To follow the data, you should be able to add the central's BDADDR to the "Connect to Initiator Address" to follow some data captures. However, the sniffer does not support decrypting traffic so it will not be able to find certain data payloads in these cases.