LPSTK-CC1352R: output reading for the accelerometer in the TI SensorTag kit

Marvin Cantos

Expert 4535 points

Part Number: LPSTK-CC1352R

Hi Team,

Good day. I am posting this on behalf of the customer.

Please see the transcript of the inquiry below.

" I'd like to know what the output reading is for the accelerometer in the TI SensorTag kit...does it give Hz?

I have a student who would like to measure vibrations and we thought this might work

Part number: LPSTK-CC1352R"

Thank you for your help.

Kind regards,

Marvin

over 2 years ago

+1 Arthur R☑️ over 2 years ago

TI__Mastermind 18747 points

Hi Marvin,

Our default firmware does not provide vibration frequency information.

They can find information about the default multi_sensor firmware loaded with the LPSTK-CC1352R here:https://dev.ti.com/tirex/explore/content/simplelink_cc13xx_cc26xx_sdk_6_20_00_29/examples/rtos/CC1352R1_LAUNCHXL/ble5stack/multi_sensor/README.html

Is is shown that the board uses the ADXL362 accelerometer. Using the datasheet, they can modify the firmware in order to get the data they want from the accelerometer.

From that, they can devise an algorithm do measure the vibration frequency

Regards,

Arthur

Bluetooth®︎

Bluetooth forum

LPSTK-CC1352R: output reading for the accelerometer in the TI SensorTag kit