HI
I using the example BLE5 "project_zero", I hope to be able to debug with BTOOL but BTOOL reports an error:
I hope to be able to help.
Thank you!
Tdy
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI
I using the example BLE5 "project_zero", I hope to be able to debug with BTOOL but BTOOL reports an error:
I hope to be able to help.
Thank you!
Tdy
Hi Tdy,
The host_test project is meant to be used with BTOOL, can you confirm that you've loaded this firmware onto the device connected to your PC? Please refer to the BTool instructions of the BLE5-Stack Quick Start Guide.
Regards,
Ryan