CC2640R2F: CC2640R2F

Navod Rajapakisha

Part Number: CC2640R2F
Other Parts Discussed in Thread: ADS1147,

I need ADS1147 and CC2640R2 microcontroller using the master and using spi to get the data in the slave and the code and its details.please help me

over 2 years ago

0 Markel Robregado over 2 years ago

Guru 86635 points

Hi,

What you can do is review the datasheet of ADS1147 and create a low level code library that will work for CC2640R2F. You can use SPI example programs as base.

But, if you are new to this its a lot of work.

Alternatively you can port ADS1147 code libraries from the internet to work for CC2640R2F.

https://github.com/watterott/Arduino-Libs/tree/master/ADS1147

It's a lot of work also.

-kel

0 Clément over 2 years ago in reply to Markel Robregado

TI__Guru** 101450 points

Hi,

Please refer to: https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/715855/ads1147-sample-code-for-ads1147

Regards,

0 Navod Rajapakisha over 2 years ago in reply to Markel Robregado

Prodigy 40 points

Thanks you

0 Navod Rajapakisha over 2 years ago in reply to Markel Robregado

Prodigy 40 points

I tried to find the example code for this but can not found in internet

0 Clément over 2 years ago in reply to Navod Rajapakisha

TI__Guru** 101450 points

Hi,

Please share the work you have done on this topic.
Explain where are the remaining blocking points and what we can do to help.
Without these elements, no additional support can be provided.

In all the cases, forum contributors cannot write code for academic project instead of the students.

Thank you for your comprehension.

Regards,

Bluetooth®︎

Bluetooth forum

CC2640R2F: CC2640R2F