CC2650STK: cc2650 Launchpad

Hello,

Thank you so much for getting back to me. I believe that the SDK I downloaded (SIMPLELINK-CC13XX-CC26XX-SDK) includes both the BLE-STACK-2-X and TI-RTOS-MCU, as I was able to locate them in the subfolder. However, before delving into BLE, I was hoping to read and control the PPG sensor. As such, I would greatly appreciate an example code for I2C. Afterwards, I attempted to use the code for CC1352R found in C:\ti\simplelink_cc13xx_cc26xx_sdk_6_40_00_13\examples\nortos\CC1352R1_LAUNCHXL. However, I encountered an issue when using sysconfig. Could you please guide me on how to change the sysconfig board from CC1352R1 to CC2650? I have been unable to locate it in the resource explorer. Thank you very much for your assistance. P.S. the code of I2C for cc1352r1 are compatible with the cc2650 launchpad? 

Hi,

SIMPLELINK-CC13XX-CC26XX-SDK does NOT support CC2650.

Regards,

Hi,

Could you please guide me on how to use the sysconfig for CC2650 Launch pad? Thanks

Hi,

Could you please guide me on how to use the sysconfig for CC2650 Launch pad? Thanks

Thank you for explaining that. Given this situation, could you please suggest a way for me to begin using the CC2650 Launchpad to control a PPG sensor via I2C? I noticed that the previous SDK you recommended did not include any example code for I2C. Would it be possible for me to use RTOS Config instead, and generate the code using it and import it into CCS? Thank you.

Hi,

For CC2650 usage, please refer to https://www.ti.com/lit/swru393, and use the https://www.ti.com/tool/download/BLE-STACK-2-X and https://www.ti.com/tool/TI-RTOS-MCU. There you'll find the required examples.

Regards,

Hi,

Unfortunately, despite following your instructions on getting started with the cc2650 launchpad, I encountered several new errors. It appears that the version of CCS that I am using does not support Tirtos, and even after installing the oldest version available (V9), I am still having issues.

Moreover, I've noticed that the cc2650 is a comparatively old product. In light of this, could you please recommend a more recent device (EVM) that serves the same function as the cc2650 but has a more compatible coding environment and example code?