CC2652R7: Features Availablity in SDK

mohan prasanna R

Intellectual 700 points

Part Number: CC2652R7

SDK using : simplelink_cc13xx_cc26xx_sdk_7_10_01_24

Chip-set : CC2652R7 (Acting as a BLE peripehral)

Code using : simple_peripehral

We need to know the below features are available in the SDK we are using,

1) BLE automatic frequency hopping

2) Re-transmission advertising processing

Please let us known the details about this

over 1 year ago

0 Jan over 1 year ago

TI__Mastermind 36690 points

Hi,

The BLE5-Stack does include automatic frequency hopping in a connection. Can you clarify what you mean by "Re-transmission advertising processing"? Do you mean that advertisements are continuously sent out after they are enabled? If so, then yes. The BLE5-Stack does support this functionality.

Best Regards,

Jan

0 mohan prasanna R over 1 year ago in reply to Jan

Intellectual 700 points

Hi,

Retransmission Advertising mean,

Three advertising channel cannot communicate because of Wi-Fi interference.

In this case , Advertising should resend.

Please conform this also

0 Jan over 1 year ago in reply to mohan prasanna R

TI__Mastermind 36690 points

Hi,

By default, when advertising is enabled the device will advertise on the three advertising channels continuously. If one packet experiences Wi-Fi interference, then the next would will likely avoid the interference as it will be on a different advertising channel.

Best Regards,

Jan

0 mohan prasanna R over 1 year ago in reply to Jan

Intellectual 700 points

Hi Jan,

Like you mentioned "If one packet experiences Wi-Fi interference, then the next would will likely avoid the interference as it will be on a different advertising channel" . Then Can I say like, The packet which experiences the interference will not re-transmit. Next packet only will choose the next channel to avoid the interference. Is My understanding is right ?

0 Jan over 1 year ago in reply to mohan prasanna R

TI__Mastermind 36690 points

Hi,

I would expect the next packet to be different. However, if the receiver does not receive expected data, then I would expect the receiver to request a re-transmit.

Best Regards,

Jan

Bluetooth®︎

Bluetooth forum

CC2652R7: Features Availablity in SDK