CC2652PSIP: How to enable zephyr BT_DBG

neil Yang

Part Number: CC2652PSIP

I am currently using the example of simple_mesh node and want to understand the actions running in it by opening BT_DEBG of zephyr.

Is there a quick way to enable it, or what settings do I need to make to enable it?

11 months ago

0 Jan 11 months ago

TI__Mastermind 39530 points

Hi,

Thank you for reaching out. We will look into this and get back to you as soon as possible.

Best Regards,

Jan

0 Tanguy Baltazart 11 months ago in reply to Jan

TI__Intellectual 2880 points

Hi, BT_DBG is already enabled however you need to provide your own logging function in "Mesh/zephyr/include/logging/log.h"

I suggest you take a look at this FAQ: [FAQ] CC2642R: Tips and tricks to use "BLE_LOG_INT_" functionalities - Bluetooth forum - Bluetooth®︎ - TI E2E support forums to enable logging features.

I hope this help

Tanguy

0 neil Yang 11 months ago in reply to Tanguy Baltazart

Prodigy 50 points

Hi Tanguy,

Thank you for your reply.

So, if I understand correctly, I need to study the methods and functionality provided in osal.c and then adapt or replicate them to implement the desired functionality in log.h, is that correct?

Regards,

Neil

0 Tanguy Baltazart 11 months ago in reply to neil Yang

TI__Intellectual 2880 points

Hi Neil,

You don't have to replicate them you can just call them. But you may have to use wrappers around because I am not sure the 2 Api are directly compatible.

Regards,

Tanguy

0 neil Yang 10 months ago in reply to Tanguy Baltazart

Prodigy 50 points

Hi Tanguy,

Thank you for your suggestion! I will further research these two APIs and attempt to integrate them using this approach.

Regards,

Neil