• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 51 subscribers
  • Views 131 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2652R7: Missing Dimention of 2.4GHz Inverted F Antenna Reference Design

Tharusha Hansima
Prodigy 100 points
Part Number: CC2652R7

Tool/software:

This reference design was found from TI, but it does not properly mention the dimensions for L1, H1, and H2. Does anyone know the exact dimensions of these parameters?

  • +1
    TI__Guru**** 169294 points

    Hi,

    Thanks for your inquiry.

    The H1 dimension in your picture is the same as W2 in our picture. With that information, you don't need H2 but simply extend the polygon to meet the vertical feed in the  left 90° corner.

    L1 in your picture is not very critical as long as you do not short or stray too far from the apparent proportions. In any case, we set it to 1.2 mm, which is also equals to L7 - (L5 + L6)

    Hope this helps,

    Rafael

  • 0 in reply to desouza
    Prodigy 100 points

    Thank You desouza