• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 51 subscribers
  • Views 59 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-CC2640R2: Launchpad connection issue with lab view

Ankush Syal
Prodigy 50 points
Part Number: LAUNCHXL-CC2640R2
Other Parts Discussed in Thread: UNIFLASH

Tool/software:

when i am trying to connect the launchpad with TIDA01580 application .getting the error below

According to TIDA01580 manual instruction, launchpad should not be connected to TIDA 01580 board it should be in original jumper setting when we are connecting to Lab view application

But in my case, when i am disconnecting the TIDA board it shows the error above but when the TIDA board is connected with launchpad it shows no error.

  • 0
    TI__Expert 8641 points

    Hello Ankush Syal,

    Does the launchpad work outside of the TIDA01580; meaning if we open some other program (CCS, UniFlash, SmartRF Studio) you can use the Launchpad correctly? I am looking into your issue here, though I currently do not have a TIDA01580 on hand. 

    Thanks,
    Alex F