This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2642R-Q1: Programming doubts

Part Number: CC2642R-Q1

Tool/software:

This is regarding device 'CC2642R1TWFRTCRQ1'

When I send the command COMMAND_GET_CHIP_ID = 0x28 to the device. What is the expected result?

  • Hello,

    According to the TRM: 

    COMMAND_GET_CHIP_ID returns the 32-bit USER CODE from the AON_PMCTL JTAGUSERCODE register with MSB first. The ID is returned within a protocol packet.

    What value are you getting when running the command? Do you mind providing some information as to the use-case?

    Best,

    Nima Behmanesh