• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 51 subscribers
  • Views 386 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Link error for newest ccxware

Rasik
Prodigy 175 points
Other Parts Discussed in Thread: SYSBIOS, BLE-STACK

Hi,

Just have got integrated latest "ccxware" (cc26xxware_2_21_01_15600) to existing project with SDK (ble_cc26xx_2_00_00_42893)

Flashes error as below during linking.

Error[Li005]: no definition for "driverlib_version_2_00_06_42416" [referenced from mangled__BIOS_lib.obj(sysbios.arm3)]

Regards

  • 0
    TI__Guru** 105180 points
    Hello,

    Unfortunately, you haven't provided enough information to understand what the issue could be. Most likely a step was missed in the porting guide article.

    Best wishes
  • 0 in reply to JXS
    Prodigy 175 points

    Hi,

    Probably yes.

    I came across porting guide for the same later.

    But, seems highlighted note gives hint to hold off the integration of ccxware until next SDK version is released. (if its not far away !)

    Can I have tentative availability of the same ?

    "Note: BLE-stack 2.0.0 has not been tested or certified with this release of TI RTOS. There might therefore be unknown issues and it is not recommended using this combination for mass production but it can be used as an intermediate step until BLE-stack 2.1 is released."

     

    Regards.