connecting PAN1315EMK to MSP-EXP430FG4618

natanel

Intellectual 590 points

Other Parts Discussed in Thread: MSP430F5438, MSP430F2013, MSP430FG4618, MSP430BT5190

can the new PAN1315EMK can be connected to the MSP-EXP430FG4618 and work with it?

I allready know it can plug into MSP-EXP430F5438 Experimenter Board

but I need it for the MSP-EXP430FG4618, any way to connect it there

even not using the Wireless expansion?

thanks

over 13 years ago

0 Nir Gluzman over 13 years ago

TI__Intellectual 1520 points

Hi Natanel,

In order to enable Bluetooth on MSP430 devices you need HW (PAN1315 Bluetooth module) and SW (EtherMind Bluetooth stack).
MSP430 runs the Bluetooth stack.
TI has decided to enable Bluetooth stack on MSP430F5438 devices at this moment.
MSP-EXP430G4618 carries MSP430FG4618 and MSP430F2013 devices, and therefore cannot run the SW.

Please refer to http://www.ti.com/connectivitywiki for detailed info on the solution.

Regards,
Nir

0 Nir Gluzman over 13 years ago in reply to Nir Gluzman

TI__Intellectual 1520 points

Hi Natanel,

In order to avoid confusion, please note that Bluetooth for MSP430 is supported only with MSP430BT5190 which can be
used in the Experimenter board for the MSP430F5438.

Regards,
Nir

Bluetooth®︎

Bluetooth forum

connecting PAN1315EMK to MSP-EXP430FG4618