This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

My smartRF06s don't have the current measurement circuit

Other Parts Discussed in Thread: INA216

Hi, 

today I noticed that both my SmartRF06 boards don't have the current measurement circuit mounted. On the User’s Guide (SWRU321A) it is stated that the board has a circuit for high side current measurement (based on the INA216), but the boards I have here don't have the INA mounted and the shunt resistor is 0ohm. Why?

Davide.