LAUNCHXL-CC26X2R1: OAD using Btool Error

Ohad Katzav

Part Number: LAUNCHXL-CC26X2R1

HI,

I currently tring to test the OAD using TI examples and instruction.

I installed the Btool and setup a download setup with host and client (Simple BLE Peripheral).

The OAD download failed on OAD_BUFFER_OFL. (According to the documentation it is not matched block number.

BTW, when I test it with sensor tag, the OAD works fine.

Any recommendations ?

0 Zahid Haq over 8 years ago

Hi,

Which version of BTool are you using? Can you try with higher connection interval?

Best wishes

0 Ohad Katzav over 8 years ago in reply to Zahid Haq

HI,

Thanks for the response.

The Btool version is 01.42.03

I did try with higher interval and I always get the same failure.

0 Zahid Haq over 7 years ago in reply to Ohad Katzav

Hi,

Please use the latest version of the stack (v2.10.00.44) and follow the instructions in the OAD guide:
software-dl.ti.com/.../performing-an-oad.html

Best wishes

Bluetooth forum