LAUNCHXL-CC1352R1: LAUNCHXL-CC1352R1

shivaram mudragada

hiiii,

i am using cc1352 launchpad watchdog timer, and i want to use it in reset mode but my device is not resetting instead of it creating some errors

but in timer interrupt mode working perfectly.... i am using the cc1352r1 launchpad watchdog example

params.resetMode =Watchdog_RESET_ON;

regards,

shiva

over 7 years ago

0 IUsedToBeARealPerson (M-W) over 7 years ago

TI__Guru 58425 points

Hi Shiva,

What kind of error are you seeing? Keep in mind that when testing out the watchdog timer you need to disconnect the debugger from the device. If the debugger is left connected to the device it will per default freeze following a reset (this to enable debugging the device in case of failure).

0 shivaram mudragada over 7 years ago in reply to IUsedToBeARealPerson (M-W)

Intellectual 310 points

thanks M-W for the reply this resolved my issue

Bluetooth®︎

Bluetooth forum

LAUNCHXL-CC1352R1: LAUNCHXL-CC1352R1