CC256XM4BTBLESW: How to enter LE mode

Cary Wang

Intellectual 580 points

Part Number: CC256XM4BTBLESW
Other Parts Discussed in Thread: EK-TM4C123GXL

Dears:

We use EK-TM4C123GXL launch Pad to test CC256X with software CC256x M4 Bluetopia SDKv1.2 R2.

We refer to below link:

processors.wiki.ti.com/.../CC256x_TI_Bluetooth_Stack_SPPLEDemo_App

We want to know which command can enter to LE mode? Default is SPP + LE mode.

Thank you!

over 5 years ago

0 Hari Nagalla over 5 years ago

TI__Mastermind 27080 points

Humm. If, you are using the demo application along with the SDK, it should have already enabled LE. Your question is not clear. What, do you mean by Default is SPP+LE mode?

Thanks

0 Cary Wang over 5 years ago in reply to Hari Nagalla

Intellectual 580 points

Hari Nagalla,

Thanks for your reply.

When we key commond: Client on the Board, The mode is SPP+LE.

We want to use LE Mode only now. Which command can change to LE Mode? Thanks!

We want to use LE Mode as below.

0 Hari Nagalla over 5 years ago in reply to Cary Wang

TI__Mastermind 27080 points

It is just a prompt in the demo app to indicate, that we are using SPP with LE GATT profile. LE is infact enabled.. Please, check "SPPLEDemo.c" in the sample applications of the SDK.

void DisplayPrompt(void)
{
Display(("\r\nSPP+LE>"));
}

Thanks

Bluetooth®︎

Bluetooth forum

CC256XM4BTBLESW: How to enter LE mode