CC2564: cc2564

user5828755

Part Number: CC2564

Bluetooth pairing and connection are two different processes.Cc2564 can only be paired with the bluetooth connection on the phone, but cannot be connected.I would like to know what operations are required after pairing (for example, what commands need to be sent by MCU to cc2564) to enable the phone to connect to cc2564.

over 7 years ago

0 Eyal Reizer over 7 years ago

TI__Mastermind 20285 points

Hi,

Have you consulted the following documentation?:
www.ti.com/.../TIBLUETOOTHSTACK-SDK

Best Regards,
Eyal

0 user5828755 over 7 years ago in reply to Eyal Reizer

Prodigy 40 points

Yes,I operate according to the official document, which USES an APP of SPP to connect with cc2564.However, the bluetooth operation interface of the phone can only be paired with cc2564 but cannot be connected.

0 Hari Nagalla over 7 years ago in reply to user5828755

TI__Mastermind 27090 points

The phone has to support SPP profile in either server or client to get connected. Try HFP or A3DP demos, as the phone may directly accept these profiles..

0 user5828755 over 7 years ago in reply to Hari Nagalla

Prodigy 40 points

OK. I’ll try that.

0 Hari Nagalla over 7 years ago in reply to user5828755

TI__Mastermind 27090 points

I hoped, it worked on your setup.. I am closing the thread for now.. If, there is a new issue, raise another..

Thanks

Bluetooth®︎

Bluetooth forum

CC2564: cc2564