This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SMARTRFTM-STUDIO: SMARTRFTM-STUDIO

Part Number: SMARTRFTM-STUDIO
Other Parts Discussed in Thread: CC1350

I am trying to connect the CC1350 Launchpad and it is not showing up on the SmartRF Studio. Not showing up in the list of connected device window. The LaunchPad was flashed again and I know it is working as I can see the Green and Red LEDs blinking, I have used this device for pwnLed program and I can do the blink program - all of them work - except identify in the SmartRF tool ! 

The SmartRF Studio is ver 7, 2.12.0 , downloaded from the TI site.

The Launchpad is CC1350 Rev 1.2 ( i have two of them and both are not getting recognised by S-RF tool )

I have pressed the reset button multiple times ! no luck. 

Following instructions from this link.

Any help would be appreciated.

Appreciate any help.