CCS/CC2650: #cc2650 #ccs

Rathna

Part Number: CC2650

Tool/software: Code Composer Studio

Hello,

I have installed ccs7 and I have updated the compiler version as per the requirement. I am able to build the simple peripheral example in sdk stack, but while I am trying to run the stack program, it says it does not find the "main" so target not reached. I am not able to understand the problem. Please help me regarding the same.

Thanks,

Rathna

over 6 years ago

0 J Lindh over 6 years ago

TI__Guru 57865 points

Hi Nagarathna,
Why are trying to run the stack project? If you flash app and stack, does the program run correctly?

0 Rathna over 6 years ago in reply to J Lindh

Intellectual 670 points

i just tried to follow the instructions on software development guide, with the following steps:

1. Set the stack project as the active project.
2. Select Project→ Build All to build the stack project.
3. Set the application project as the active project.
4. Select Project→ Build All to build the application project.
5. Select the stack project as the active project.
6. Select Run→ Debug to download the stack.
7. Select the application project as the active project.
8. Select Run→ Debug to download the application.

These are the messages displayed on the console.
Cortex_M3_0: GEL Output: Memory Map Initialization Complete.
Cortex_M3_0: GEL Output: Board Reset Complete.
Cortex_M3_0: AutoRun: Target not run as the symbol "main" is not defined

Please let me know what should be done.

Thanks in advance!

Regards,
Rathna

0 Rathna over 6 years ago in reply to J Lindh

Intellectual 670 points

ArgError.docx

0 YiKai Chen over 6 years ago

Guru 735685 points

You cannot trace and debug stack program. You can only trace/debug BLE application program.

Bluetooth®︎

Bluetooth forum

CCS/CC2650: #cc2650 #ccs