BOOSTXL-AOA: BOOSTXL-AOA

Leo Theunissen

Prodigy 20 points

Part Number: BOOSTXL-AOA

Hi,

I've downloaded and ran simplelink_cc2640r2_sdk_2_40_00_32 and can't find aoa_receiver or sender.

Searching for it on the PC in the TI/ simplelink_cc2640r2_sdk_2_40_00_32 directory is not finding it either,

Any idea?

/Leo

over 6 years ago

0 J Lindh over 6 years ago

TI__Guru 57865 points

Hi Leo,

The examples from SDKv2.30;

Aoa_reciever (I/Q sampling)
Aoa_sender
Tof_initiator
Tof_passive
Tof_responder
Cm_aoa (I/Q sampling)

is covered by new sample applications in SDKv2.40, combining the AoA and ToF;

Rtls_passive (I/Q sampling)
Rtls_master
Rtls_slave

0 Leo Theunissen over 6 years ago in reply to J Lindh

Prodigy 20 points

Thanks ,
But is the info on your website incorrect then where AoA sender and receiver are stated in the directive (when using cc2640r2_sdk_2_40_00_32)
dev.ti.com/.../ble_aoa.html
/Leo

0 J Lindh over 6 years ago in reply to Leo Theunissen

TI__Guru 57865 points

Hi Leo,

You are pointing to the SDKv2.30 version: simplelink_academy_cc2640r2sdk_2_30_02_00/modules/blestack/ble_aoa/ble_aoa.html.

Please see this instead (SDKv2.40):

0 Ling Fang over 6 years ago in reply to J Lindh

Prodigy 40 points

Is there any difference of AOA-method among SDKv2.30 (2 CC2460 needed, one for transmitter, one for receivers) and SDKv2.40 (2 CC2460 needed)?

0 J Lindh over 6 years ago in reply to Ling Fang

TI__Guru 57865 points

Hi Ling,
Yes, in SDKv2.40 you will need three devices; Master, Slave, Passive.

Bluetooth®︎

Bluetooth forum

BOOSTXL-AOA: BOOSTXL-AOA