CCS/LP-CC2652RB: won't save zero project app (and any over, I suppose) in a flash

ALEXEY VIKTOROVICH OVCHINNIKOV

Part Number: LP-CC2652RB
Other Parts Discussed in Thread: CC2652RB, CC2640

Tool/software: Code Composer Studio

It seems CC2652RB LaunchPad won't save zero project app (and any over, I suppose) in a flash. Thus it doesn't load after USB reconnection to PC or power bank.

Despite the CC2640 LaunchPad has not this situation and works well.

over 6 years ago

0 J Lindh over 6 years ago

TI__Guru 57865 points

Hi,

What SDK version are you using? Did you review this:

https://www.ti.com/lit/pdf/swra649

0 ALEXEY VIKTOROVICH OVCHINNIKOV over 6 years ago in reply to J Lindh

Prodigy 80 points

I am using Code Composer Studio Version: 9.2.0.00013 with simplelink_cc13x2_26x2_sdk_3_30_00_03 SDK.

I see no solution in provided document for my problem.

Thank you.

0 Marie H over 6 years ago

TI__Guru* 82431 points

Hi Alexey,

Project Zero for CC2652RB is an oad project, meaning that you need to load a BIM and the bin version of the Project Zero image in order for it to run without the debugger attached. You can find step-by-step instructions for running the project in the SimpleLink Academy BLE Fundamentals lab:

(Project Zero for CC2640 is different, it's not an OAD project.)

0 ALEXEY VIKTOROVICH OVCHINNIKOV over 6 years ago in reply to Marie H

Prodigy 80 points

Thank you!

Bluetooth®︎

Bluetooth forum

CCS/LP-CC2652RB: won't save zero project app (and any over, I suppose) in a flash