CC2541DK-MINI: cc2541

Pallavi Dahikar

Part Number: CC2541DK-MINI

Hello team,

I have query, why BLE peripheral code is not visible after scanning in BLE SCANNER APP or lightblueapp . is their any commands missing in simpleBLE peripheral code that not allowd to visialize device in app after scanning.

Will you please help me to resolve this issue

Regards,

Pallavi

over 3 years ago

0 Luis M over 3 years ago

TI__Expert 5345 points

Hello Pallavi,

Thanks for reaching out. I will assign someone to help you.

In the meantime, can you please indicate what SDK version you are using?

Thanks,

Luis

0 Alec May over 3 years ago in reply to Luis M

TI__Genius 17265 points

Hi Pallavi,

I believe you should be able to see the advertisements for this project out-of-the-box. It would be helpful to know which SDK version you are using as Luis said as well as if you have made any changes to the project. I will attempt to recreate this issue on my end but it may take me some time to find the hardware due to the current working-from-home environment.

Best Regards,
Alec

0 Pallavi Dahikar over 3 years ago in reply to Alec May

Prodigy 70 points

Hello Luis I am using SDK version 1.5.1

0 Alec May over 3 years ago in reply to Pallavi Dahikar

TI__Genius 17265 points

Hi Pallavi,

While I try to find the hardware to recreate this issue, lets run through some initial troubleshooting. Are you able to confirm that the image was loaded onto the device properly? Have you tried flashing any other examples other than simple_peripheral?

Best Regards,
Alec

Bluetooth®︎

Bluetooth forum

CC2541DK-MINI: cc2541