This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LPSTK-CC1352R: AoA example rtls_slave LPSTK-CC1352R

Part Number: LPSTK-CC1352R
Other Parts Discussed in Thread: CC1352R

Hello Clément,

Thanks for providing this step by step instruction: https://e2e.ti.com/support/wireless-connectivity/bluetooth/f/bluetooth-forum/983612/lpstk-cc1352r-port-aoa-example-rtls_slave-to-lpstk-cc1352r

I tried to create and build my new project several times, so I could flash the project on my LPSTK, but it always failed.

Also I tried to change paths and folder-/filenames but so far that did not work out either.

Attached I will provide a few impressions of my error messages in CCS and a picture of my hardware setup, according to the LPSTK-CC1352R flash instruction, provided in the resource explorer.

I am looking forward to finally getting this device to run......! :-)

  • Hi,

    Thank you for the feedback. I made a typo / mistake when I wrote the thread. Sorry for that. I have updated the thread to avoid other people get in trouble too.

    The issue seems to come from the name of the folder "C:\ti\simplelink_cc13x2_26x2_sdk_4_40_00_44\examples\rtos\LPSTK_CC1352R\ble5stack\rtls_slave" instead of "C:\ti\simplelink_cc13x2_26x2_sdk_4_40_00_44\examples\rtos\CC1352R1_LAUNCHXL\ble5stack\rtls_slave".

    You should try to modify the file rtls_slave_CC1352R1_LAUNCHXL_tirtos_ccs.projectspec to replace the occurrences of "\LPSTK_CC1352R\" by "\CC1352R1_LAUNCHXL\".

    I recommend you delete completely the project you currently have. Then you do the modification suggested, then import the project in CCS.

    I hope this will help,

    Regards,

  • Hi,

    This helped, although I thought I corrected that too at least once the last couple days.

    I started once more all over and now it is running, thanks!