This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2650MODA: SmartRF FLASH programmer unable to halt target cpu

Part Number: CC2650MODA
Other Parts Discussed in Thread: ENERGYTRACE, TMDSEMU110-U, LAUNCHXL-CC26X2R1, CC2650, TMDSEMU110-ETH

Hi,

I'm trying to program the CC2650MODA BoosterPack with the SmartRF FLASH programmer.  It is able to connect (Sensor Controller Studio also works) but when I try to flash I get an error message that it is unable to halt target cpu.

I'm using the Debugger Devpack rev 1.3.0 plugged onto the BoosterPack:

Thanks for your help,

Jim