This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-00650

Intellectual 885 points

Replies: 12

Views: 773

 I download all files from www.ti.com/.../TIDA-00650TIDA-00650 Gerber link (9 Sept 2015) gives a zip folder tidcav6.zip. It contains folder TI_K2E_EVM_DFM_18-00175-02 which has files for a totally unrelated board.

Where can I get the correct files?

12 Replies

  • Guru 106335 points
    Hi AdtK,

    You are right! I have notified the author of the TI Design.

    Cheers,
    Fredrik
  • In reply to Fredrik K:

    Thank you Fredrik! Can you please give me an idea on when I can expect an update?
  • Guru 106335 points

    In reply to AdtK:

    I got feedback right away from the author that he would fix it, so hopefully it won't be long. I cannot be more specific than that as it is not in my hands. He also said he would reply here when done.

  • The Gerber Files have been updated. Sorry for the mistake and thanks for highlighting it to us.

    Regards
    Alex
  • In reply to AlexW:

    Thanks Alex and Fredrik for the update! We intend to assemble a few boards for evaluation so I will really appreciate if I can get an email contact for future support on this. Thanks again!
  • In reply to AdtK:

    I am a software developer and I do not completely understand gerbers so I wanted to confirm what I am told by the factory - the board is 4 layers, but there are only 2 copper layers. Is this accurate?

    Also FYI, BOM part number for designator C14 is not available any more. No results from Murata, Mouser and Digikey.

  • In reply to AdtK:

    Hello AdtK,

    you are correct, there the 2 inner layers missing. Not exactly sure what is happening here while uploading to the web, since the original data are correct. We will initiate another update and let you know once it is available.

    C14 seems to be not available anymore. You can use any other capacitor with similar value. The voltage rating can be less (for example 6.3V) and also the capacitor value can be less than 10uF.

    Regards
    Alex
  • In reply to AlexW:

    Hello AlexW,

    Is this corrected now? If not, can you please inbox these files to me?
  • In reply to AdtK:

    The updated Gerber files are online.

    Regards

    AlexW

  • In reply to AlexW:

    Thanks AlexW! Are there any release notes so I can compare this with the previous before I release files to the factory? I really want to make sure I am sending the correct files.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.