CC2564C: Implementing PAN profile in TI Bluetooth Stack

M.A.M

Expert 8795 points

Part Number: CC2564C

Hi,

Our customer ask for PAN profile support in the TI Bluetooth Stack for STM32.

- What EMEA resource exist to help implementing this for them? Please forward instructions.

Thanks.

B.r /M.A.M

over 8 years ago

0 S over 8 years ago

TI__Mastermind 35795 points

Hi ,
Your query has been assigned to relevant engineer. We will get back to you shortly

Thanks
Saurabh

0 dale over 8 years ago

TI__Expert 6335 points

M.A.M.,

STM32 does not support PAN profile. Refer to this table to see which profiles are supported with each version of the stack.

processors.wiki.ti.com/.../CC256x_TI's_Bluetooth_Stack

0 M.A.M over 8 years ago in reply to dale

TI__Expert 8795 points

Dale,

Let me rephrase my question.

We know that PAN 1.0 profile is not implemented today in TI Bluetooth Stack. We saw that in the table before posting to E2E.

We also assume that TI R&D has no immediate plans of implementing this profile due to lack of demand, however:

Q: - Can you please help us find a Contractor/Software Design House, preferrably in the EMEA due to time zone, that you can recommend for high-quality deliverables, familiar with TI Bluetooth Stack, that would be a good partner for implementing the PAN 1.0 profile for a specific customer?

Thank you in advance.

B.r /M.A.M

0 dale over 8 years ago in reply to M.A.M

TI__Expert 6335 points

These resources are available for development outside the normal support range of TI.

Bluetooth®︎

Bluetooth forum

CC2564C: Implementing PAN profile in TI Bluetooth Stack