This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PACKET-SNIFFER: Packet-Sniffer (Display filter)

Part Number: PACKET-SNIFFER

Anyone has any knowledge or luck using the Display Filer to get following packets ?

I tried "Data Type" Filter condition :  PTY=L2CAP-S

but did not work. once apply filter nothing show

The only display filter I can get working is "Channel" 

Had searched forum, seems issue really resolved with a solution.

  • Found the solution...Amazing after few years, TI still did not make an update

    e2e.ti.com/.../1730389
  • Hey Dilbert!

    Thanks for follow Up with us that you found a resolution! Yes, you are correct that we haven’t updated that tool for sometime but part of that is because the USB dongle is limited in its support inherenatly to just BLE4.0 and some BLE4.2 features and not the full suite. We believe it’s a great tool for developers interested in BLE4.0 but if there is interest for a tool for 4.2 or BLE 5 features such as privacy there are quality third party sniffers out such as the Ellisys or Frontline that do the job best. We’ve tried to focus on providing new chips, software and TI Designs in the mean time!

    Hope this helps bring understanding and super thanks for the feedback!

  • 1) I do understand this but at least put a readme in release for known issue.

    2) it is strange that Sniffer-2 using Wireshark does not support BLE using TI board.