LAUNCHXL-CC2640R2: 3D printable enclosure for LAUNCHXL-CC2640R2

PATRICK OHARA

Hello all,

I tried to find an enclosure for my LAUNCHXL-CC2640R2 and couldn't find one. So, I decided to design one myself using Autodesk's Fusion 360. A photo of the printed enclosure is shown below. Unfortunately the native .stp files needed to print this cannot be uploaded to this forum. If you'd like the printable files send an email request to info@blufinlabs.com.

over 5 years ago

0 Fredrik K over 5 years ago

TI__Guru** 106705 points

Hey Patrick,

That is pretty cool!

What is preventing you from uploading the files? Is it a technical issue?

Regards,
Fredrik

0 PATRICK OHARA over 5 years ago in reply to Fredrik K

Genius 3185 points

Hi Fredrik,

Only certain file types are permitted to be uploaded to this TI site. Unfortunately a .STEP or .STP file are not permitted. You can get the .STEP file at my public GitHub repository.

Hope all is well with you,

Patrick

0 Fredrik K over 5 years ago in reply to PATRICK OHARA

TI__Guru** 106705 points

Hi Patrick,

I understand, thanks for posting on Github. I already pointed another guy to your thread :-)

I am good thanks, hope all is well with you too.

Fredrik

Bluetooth®︎

Bluetooth forum

LAUNCHXL-CC2640R2: 3D printable enclosure for LAUNCHXL-CC2640R2