TIDC-CC2650STK-SENSORTAG: A third party sensor to be hocked to this kit.

DWYDILYT

Part Number: TIDC-CC2650STK-SENSORTAG
Other Parts Discussed in Thread: LAUNCHXL-CC2640R2, CC2650, CC2640R2F, CC2642R

Hello guys,

I would like to use this kit in the title to be acquiring a third party sensor data. The sensor sends analog data to be collected in series through MC or so.

I this kit able to be reading third-party data or it is only the sensors that exist on it.

Also, I am open to any suggestions for other kits that can do so over Bluetooth.

Thank you

over 4 years ago

0 YiKai Chen over 4 years ago

Guru 735455 points

You mentioned "The sensor sends analog data to be collected in series through MC or so. " but what does MC exactly stand for? By the way, I would suggest you to use LAUNCHXL-CC2640R2 or LAUNCHXL-CC26x2R which might be more easier for you to wired 3rd party sensors.

0 DWYDILYT over 4 years ago in reply to YiKai Chen

Prodigy 50 points

Thank you YiKai, that really helps. I meant Microcontroller by MC, sorry for confusion. I believe your suggestions will work for me. Do you have any examples done on these alternatives for Accelerometers for example?

Thanks again,

0 YiKai Chen over 4 years ago in reply to DWYDILYT

Guru 735455 points

If you are asking ADC reading on CC2650, you can refer to ADC example at http://dev.ti.com/tirex/explore/node?node=AE7zGaUsr-w2QdQB0Phc5g__Drd3Vmn__LATEST

0 Fredrik K over 4 years ago in reply to YiKai Chen

TI__Guru** 106705 points

Hi Sameir,

As YiKai suggest further up, I would highly recommend a LaunchPad rather than the SensorTag as these are much easier to connect to other HW (such as sensors). The CC2640R2F and CC2642R also has much better SW support than CC2650.

The ADC example for the CC2640R2F LaunchPad can be found here: dev.ti.com/.../node

Regards,
Fredrik

Bluetooth®︎

Bluetooth forum

TIDC-CC2650STK-SENSORTAG: A third party sensor to be hocked to this kit.