CC2540: Issue with Perl not working

Chris Hess

Part Number: CC2540

I am having the same issue:

C:\Users\nch1\Documents\Texas Instruments\SmartRF Studio v7\scripts>dal_test.pl
Can't find 'boot_dal_ext' symbol in ./dal_ext.dll
at dal_ext.pm line 11.
Compilation failed in require at C:\Users\nch1\Documents\Texas Instruments\SmartRF Studio v7\scripts\dal_test.pl line 8.
BEGIN failed--compilation aborted at C:\Users\nch1\Documents\Texas Instruments\SmartRF Studio v7\scripts\dal_test.pl line 8.

I tried creating the described solution, but it still doesn't work.

Does everyone trying to use Perl have this issue?

Chris

over 4 years ago

0 Marie H over 4 years ago

TI__Guru 73361 points

Hi Chris,

I am not sure we can help, but I will try to set you in contact with an internal expert.

0 Eirik V over 4 years ago

TI__Guru 56590 points

Can this thread be of any help?

https://e2e.ti.com/support/wireless-connectivity/other-wireless/f/667/p/461479/1656720#1656720

0 Chris Hess over 4 years ago in reply to Eirik V

Prodigy 60 points

I looked over the problem/description in the link, but it seems the users are able to communicate to the board. My issue is I can't communicate to the board. 'boot_dal_ext' can't be found in './dat_ext.dll. I have looked at this and dal_ext.pm and cannot find an issue. It may be my lack of understanding of Perl, but it seems like the instructions presented should be straight forward. I don't know if I am missing something or it just doesn't work.

Bluetooth®︎

Bluetooth forum

CC2540: Issue with Perl not working