This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-CC26X2R1: Bluetooth Low Energy Packet Protocol Sniffers

Guru 56500 points

Replies: 0

Views: 249

PACKET-SNIFFER (TI - CC2540 USB Dongle)

TI BLE Packet sniffer is a low cost option from Texas Instruments that support BLE 4.0.

Sniffer software http://www.ti.com/tool/PACKET-SNIFFER
HW Front End http://www.ti.com/tool/CC2540EMK-USB 

 

PACKET-SNIFFER-2 (TI - LAUNCHXL-CC26X2R1)

Packet Sniffer 2 use Wireshark and the CC26x2 Launchpad.

Sniffer software  http://www.ti.com/tool/PACKET-SNIFFER 
HW Front End http://www.ti.com/tool/LAUNCHXL-CC26X2R1 

3rd Party 

Here are a few third party packet sniffers that also require a physical sniffer you would need to purchase:

Best Regards, Eirik
Please refer to the resources and abbreviations below for explanations and answers to many questions.


SLA - Simplelink Academy, SCS - Sensor Controller Studio, SC - Sensor ControllerTI Cloud ToolsResource Explorer, Bluetooth low energy software stack, Bluetooth low energy software stack archiveTI BLE Wiki (OLD)BLE Getting Started and FAQCC1352R and CC26x2R Intro, Bluetooth SIG Core Spec, CC2640R2F SDG, CC26X2 SDG, CC2650/CC2640 SDGBLE PACKET SNIFFER