BOOSTXL-CC2650MA: BOOSTXL-CC2650MA, MSP432P401R

Judith Cordero

Part Number: BOOSTXL-CC2650MA
Other Parts Discussed in Thread: UNIFLASH

Hi,

I am trying to load program 0 into the MSP4321R with it connected to the CC2650MA by following the instructions on this page:http://dev.ti.com/tirex/explore/node?devtools=BOOSTXL-CC2650MA&node=ABK4r-KkcNI2-Z79Tqd43A__FUz-xrs__LATEST.

However I am getting this error:"Error configuring Debug Server: error= Operation was aborted".

It would be a big help if you can help me understand the problem and resolve it.

Thank you!

over 4 years ago

0 YiKai Chen over 4 years ago

Guru 735455 points

Can you do a screenshot to show where you see the error:"Error configuring Debug Server: error= Operation was aborted"?

0 Judith Cordero over 4 years ago

Prodigy 80 points

0 YiKai Chen over 4 years ago in reply to Judith Cordero

Guru 735455 points

I see you respond you didn't remove the jumper in your another similar post. After you remove the jumper and connect everything correct, do you still see this issue?

0 Judith Cordero over 4 years ago in reply to YiKai Chen

Prodigy 80 points

Yes I had the other problem initially but when I removed the jumpers then I started to have this problem.

0 YiKai Chen over 4 years ago in reply to Judith Cordero

Guru 735455 points

I can do it successfully on my firefox browser. Can you try to use Uniflash or Flash Programmer to see if it can recognize your MSP432P401R LaunchPad?

0 Judith Cordero over 4 years ago in reply to YiKai Chen

Prodigy 80 points

I tried using the firefox browser but I still got the same error. I downloaded Uniflash and it detected my MSP432P401R.

0 YiKai Chen over 4 years ago in reply to Judith Cordero

Guru 735455 points

If it still doesn't work, I would suggest you to build project_zero from by yourself.

Bluetooth®︎

Bluetooth forum

BOOSTXL-CC2650MA: BOOSTXL-CC2650MA, MSP432P401R