CC2640: TIDA-01012 Wireless IoT, Bluetooth® Low Energy, 4½ Digit, 100kHz True RMS Digital Multimeter Reference Design Board

david sun77114

Expert 2130 points

Part Number: CC2640
Other Parts Discussed in Thread: TIDA-01012

Hi, All

Does anyone know how and where to buy a prototype board of TIDA-01012? the TI website says

"Fully assembled board (shown above) developed for testing and performance validation only, not available for sale".

TI has many evaluation boards for most of its chips. why this one is not available for sale. safety issue? FCC?.

It does not make sense that each developer builds a prototype board by themselves. is there any issue if I make the assemblies based on the document provided by TI, and provide it to the developer?

if TI couldn't provide it and the third party can, it will benefit both the user and TI, does this make sense? I hope I can get a comment from TI.

Thanks

David Sun

over 6 years ago

0 Fredrik K over 6 years ago

TI__Guru** 106705 points

Hi David,

Unfortunately it is impossible for us to actually make and sell all the reference designs we make available. You are however free to take the design files and use them as-is for your own prototyping.

Cheers,
Fredrik

0 david sun77114 over 6 years ago in reply to Fredrik K

Expert 2130 points

Hi Fredrik

I can build prototype board and sell it to anyone who needs it. could I get the firmware source code from TI? at least I need some firmware to verify the board is working. I am a hardware engineer, not very strong on the firmware side.

Thanks,

David Sun

0 Fredrik K over 6 years ago in reply to david sun77114

TI__Guru** 106705 points

Hi David,

The FW is available for download. You will find it almost at the bottom of the web page.

Cheers,
Fredrik

Bluetooth®︎

Bluetooth forum

CC2640: TIDA-01012 Wireless IoT, Bluetooth® Low Energy, 4½ Digit, 100kHz True RMS Digital Multimeter Reference Design Board