• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 51 subscribers
  • Views 201 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2640: Another way to debug cc2640 not via JTAG connection

Jonathan Geronga
Expert 7930 points
Part Number: CC2640

Hi Team,

I am posting this on behalf of our customer.

The customer would like to know another way to debug their system not via JTAG connection ( USB or micro USB for example).
Using FTDI chip or smth like that? its mean USB to JTAG connection?

Please let me know if you have other questions for the customer.

Thanks,

Jonathan

  • 0
    TI__Guru**** 168367 points

    Jonathan, 

    If I understood correctly, your customer wants to use another physical interface and protocol to debug the device, right?

    If so, the device has the serial ports that could be connected to a USB-to-serial converter as you mentioned, but the protocol that allows inspection of variables or flags must be entirely developed by the customer.

    On the other hand, if debugging the BLE connection over the air is what they want, you can always use a protocol analyzer such as Ellisys. 

    If they want to have a deep and thorough way to inspect the device's internals, there is no better interface other than JTAG. 

    Regards,

    Rafael