We currently have a system that is based on CC2500. This is set up to use:
Modulation Format: MSK
Baudrate: 500 kBaud
Phase Transition Time: 0
The Silabs module to is configured using their radio configuration with the following settings:
Modulation Type: MSK
Bitrate: 500 kbps
Deviation: 125 kHz
Shaping Filter: None
Status right now is that we can send information from the EFR32BG13P to the CC2500 successfully but the other way around does not work well. The packet loss is ~50%. Initial measurements of the power spectrum and frequency deviation pattern shows that there are differences between the signals generated by the CC2500 and the EFR32BG13P.
The questions we have are:
1. What modulation is CC2500 actually producing when sending?
2. Can the EFR32BG13P be configured so that it can receive data from a CC2500 with a packet loss less than 1/1000?