• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 16 subscribers
  • Views 193 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC8531: PurePath wireless commander error

Downey Kim
Expert 2675 points
Part Number: CC8531

Hi TI experts,

I try to RX, TX test. but Alias name not change to Master or Slave. 

I tried to program using PurePath Wireless Configurator. image names are master_p.hex and slave_p.hex.

However, the Alias name does not change in PurePath Wireless Commander.

Please help to resolve this problem.

Thanks.

  • +1
    TI__Genius 10580 points

    Hello,

    To change the device alias in PPW Commander, please use the "Device Manager" view. Click the pencil icon next to the device alias to edit it.

    Regards,

    Daniel

  • 0 in reply to daniel_o
    Expert 2675 points

    Hi Daniel,

    Thank you for your support. I changed the name according to your advice and the flash was successful.

    However, an error occurs in the RX/TX test.

    Go to Production test tab, Slave device is deactivated.

    The slave device is activated only when Purepath Commander is executed again.

    Please tell me why the error occurs.

    Thanks.

  • +1 in reply to Downey Kim
    TI__Genius 10580 points

    I'm sure why that error occurs, but it is usually solved by resetting the CC Debugger, CC85xx DK, or restarting PPW Commander. Have you verified that the TESTER and SLAVE are both programmed with the correct images?

    Regards,

    Daniel