CC1352R: CC1352R - Safe Operating Area to flash to memory (minimum voltage requirement)

Kosta Logutin

Prodigy 100 points

Part Number: CC1352R
Other Parts Discussed in Thread: MSP430G2955

Hi Engineers,

I'm looking for a minimum Vcc requirement to flash program or erase operations from the memory for CC1352R.

For example we have it for MSP430G2955. Flash program or erase operations require a minimum VCC of 2.2 V.

Data Sheet for CC1352R is:

www.ti.com/.../cc1352r.pdf

Data Sheet for MSP430G2955 is:

www.ti.com/.../msp430g2955.pdf

over 2 years ago

0 RGW over 2 years ago

TI__Mastermind 29560 points

Hi,

The minimum voltage operating range for CC1352R is 1.8 V.

Regards,

Richard

0 Kosta Logutin over 2 years ago in reply to RGW

Prodigy 100 points

Hi Richard,

For example for MSP430G2955 there is minimum voltage operation is 1.8 volt and minimum voltage to flash to memory is 2.2 volt.

For CC1352R I found and you provided the minimum voltage operating range is 1.8 volt but I can't find the minimum voltage to flash to memory information.

+1 RGW over 2 years ago in reply to Kosta Logutin

TI__Mastermind 29560 points

Hi,

The minimum voltage to flash is 1.8V.

Thanks,

Richard

0 Kosta Logutin over 2 years ago in reply to RGW

Prodigy 100 points

Thank you!

Other wireless

Other wireless technologies forum

CC1352R: CC1352R - Safe Operating Area to flash to memory (minimum voltage requirement)