RF-HDT-AJLC: About RF-HDT-AJLC Substitution

Sh.Sasaki

Part Number: RF-HDT-AJLC
Other Parts Discussed in Thread: RF-HDT-AJLE

My customer is using "About RF-HDT-AJLC " but is looking for an alternative due to poor delivery times.

Is there an alternative to About RF-HDT-AJLC ?

RF-HDT-AJLC is Tag-it HF-I Plus. Can they be replaced by Tag-it HF-I Standard(RF-HDT-AJLE) or Tag-it HF-I Pro(RF-HDT-AJLF)?

Best regards,
Sasaki

over 1 year ago

0 Andreas Mueller over 1 year ago

TI__Genius 12995 points

Hello Sasaki,

both, the Tag-it HF-I Standard(RF-HDT-AJLE) or Tag-it HF-I Pro(RF-HDT-AJLS) containing less memory and support less RF commands. Please have a look to the datasheets and compare against the use case requirements to judge if either one can be used as a replacement for the customers purposes.

Best regards,

Andreas.

0 Sh.Sasaki over 1 year ago in reply to Andreas Mueller

Guru 13625 points

Hi Andreas-san,

Thank you for your support.

I checked "1.5 Memory Organization" and "1.6 Command Set" in the datasheet., but memory and RF command look the same on both devices.

Where can I see the difference in the data sheet?

Best regards,
Sasaki

+1 Andreas Mueller over 1 year ago

TI__Genius 12995 points

Hello Sasaki,

these are the right places to look up.

Maybe you mixed up the datasheets, as the memory size and the command list are not the same.

RF-HDT-AJLC has 2k bit of memory and supports 17 commands.
RF-HDT-AJLS has 256 bit of memory and supports 7 commands.
RF-HDT-AJLE has 256 bit of memory and supports 5 commands.

Best regards,

Andreas.

0 Sh.Sasaki over 1 year ago in reply to Andreas Mueller

Guru 13625 points

Hi,

Thank you very much.

I will check DS again.

Best regards,
Sasaki

Other wireless

Other wireless technologies forum

RF-HDT-AJLC: About RF-HDT-AJLC Substitution