Other Parts Discussed in Thread: CC2652RSIP, LP-CC2652PSIP
Hi
We are looking for design files for LP-CC2652RSIP.
Could you please help me with design files (schematic and PCB) of LP-CC2652RSIP?
Regards
Varun R
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
We are looking for design files for LP-CC2652RSIP.
Could you please help me with design files (schematic and PCB) of LP-CC2652RSIP?
Regards
Varun R
Varun,
The CC2652RSIP product page points to the correct design files for this board, which are LP-CC2652PSIP.
https://www.ti.com/product/CC2652RSIP#design-tools-simulation
Sorry it is confusing but the modules and their interconnects are the same.
Hope this helps,
Rafael
Hi Rafael
Thanks for your reply.
Could you please help me with link for design files of LP-CC2652PSIP?
I don't see "design file" tab under LP-CC2652RSIP page, usually other Evaluation kit pages have this tab.
Regards
Varun R
Varun,
It seems the anchor the "Design Tools and Simulation" is not taking it to the direct section of the page.
At any rate, click on the link I sent before and follow the highlighted tabs and links shown in the image below.
Hope this helps,
Rafael
Hi Rafael
Thank you for sharing link/path to download design file.
Looks physical EVM LP-CC2652RSIP we have and the design file (downloaded from above link and path) not matching.
for example, physical EVM have two RF connectors (with silk screen name SMA and JSC) whereas design files shows only one RF connector.
Similarly, physical EVM doesn't have R155 and R150 resistor whereas design files shows presence of R155/R150 resistors.
Could you please share design file for "LP-CC2652RSIP" or please let us know whether DIO0 and DIO3 terminated at connector terminals without series resistors?
FYI - Silk screen print on the board is "LP-CC2652RSIP" "Rev :E2" "MCU092"
Regards
Varun R
Varun,
The LP-CC2652RSIP you have is a pre-production early release and our design was updated to what I already provided to you.
The schematics mention the presence or absence of the termination resistors depending on the module you have.
Regards,
Rafael