This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WILINK8-WIFI-NLCP: WiLink8 Transmission Use Case

Part Number: WILINK8-WIFI-NLCP

Hello E2E Experts,

Good day.

Is it possible to switch the driver in half-duplex mode, so the first RF chain is RX only, and the second is TX only?

I have looked through https://www.ti.com/lit/ug/swru561a/swru561a.pdf?ts=1683781256168 and the question is still open.

Also, I could write why I need so unusual solutions, it could be made clear what I need in the final device to satisfy my case.

Regards,

CSC