• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 16 subscribers
  • Views 228 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CCS/CC8531: Can I read the configuration inside 8531 through purepath?

CC8531: CC8520 PurePath useing button pairing

taoyu
Intellectual 360 points
Part Number: CC8531

hello:

       Our company has a number of wireless products that use cc8531. We hope to pair the host and slave through buttons.

 

I have some questions.

Do we still need to write the device ID in this way?

After the device is powered on, is this pairing fixed?

Do we need to set it every time we turn it on？

  • +1
    TI__Guru**** 207157 points

    Hello taoyu,

    Once paired with a protocol master a protocol slave saves the network ID in its embedded flash and will automatically attempt to rejoin the same network in the future, and will thus be able to re-join the network after a power-down.  You can gather more information from the CC85XX User's Guide.  Once making the change inside of the PurePath Wireless Configurator you will need to re-flash the devices with the new configuration.

    Regards,
    Ryan