This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2652PSIP: difference software of CC2652P, CC2652PSIP, and CC2651P

Expert 2831 points
Part Number: CC2652PSIP
Other Parts Discussed in Thread: CC2652P, , CC2651P3

Hi

May I have question about CC26xx's software?

My customer is considering CC265xPxx.

Question1

I think CC2652P and CC2652PSIP's TRM is compleatly same document.

Is there anything to document of CC2652PSIP's RF Switch?

Or there is no configure from software?

Question 2

CC2652P and CC2651P 's SDK is same : SIMLELINK-Lowpower-F2-SDK.

Is this mean each mcu can use same stack,  API?

Is there anything difference of software?

Thanks,

GR

  • Hi GR,

    There are no RF switch concerns from a developer standpoint, as this is all handled by the pre-built RF stack libraries within the SDK.  The software solutions from the SIMPLELINK-LOWPOWER-F2-SDK are code-portable between devices and identical as far as stack usage and API is concerned.  You must however use code which selects the correct device (CC2652P, CC2651P3, or CC2652PSIP) as these devices are not binary image compatible.  The CC2652P and CC2651P3 are pin compatible with each other, but not with the CC2652PSIP.

    Regards,
    Ryan

  • Hi Ryan,

    Thanks for your information.

    I understand it.

    Best regards,

    GR