CC2640R2L: Programming specs for Texas Instruments CC2640R2LRHBR

Hi,

I am not entirely sure what you mean by the "programming specs for fastest programming method", but you can use any of the currently available XDS-class debug probes for programming your device - the most suitable are listed at the section Design and Development of the product page.

https://www.ti.com/product/CC2640R2L#design-development

Years ago I did a collection of benchmark measurements with various JTAG Debug Probes and they can be found at the URL below.

https://software-dl.ti.com/ccs/esd/documents/application_notes/appnote-debug_probe_performance_results.html

If you want to experiment with the various debug probe speeds, make sure to follow the various subsections of the page. 

I left the JTAG group years ago, therefore unfortunately the numbers are not up-to-date with the latest devices. However, your device should perform quite similarly to the CC2652R1.

Hope this helps,

Rafael

Hi,

I stand corrected. For this family of devices the public information is quite extensive.

Please check chapter 5 of the Technical Reference Manual, available in the URL below.

https://www.ti.com/lit/pdf/swcu117

Best regards,

Rafael