LP-EM-CC1354P10: LP-EM-CC1354P10-6 UART

Vivek J

Part Number: LP-EM-CC1354P10
Other Parts Discussed in Thread: CC3220SF, SYSCONFIG

Tool/software:

I am working on the mentioned board with border router example in WiSUN FAN in SimpleLink CC13xx_CC26xx SDK.

Target: CC1354P10-6

Debugger launchpad: CC3220SF LAUNCHXL with onboard xds110 debug probe(Not using XDS110 standalone debug probe).

Whether I will get any debug logs though UART in this example? How to configure UART for getting debug logs?

How to configure UART for interfacing with the host in the example?

I am taking UART Tx and Rx from 20pin debug connector on the target board when working with border router example.

0 Arthur R☑️ 2 months ago

Hi Vivek,

You will have to implement the debug logs by yourself, as the default border router does not comes with those.

In order to start, you can do the following:

In Sysconfig, add a LogSinkUART module.
You can now add the Logs where you want them to in the border router firmware, according to the API: https://dev.ti.com/tirex/explore/content/simplelink_cc13xx_cc26xx_sdk_7_41_00_17/docs/tiutils/html/group__ti__log__LOG.html

If you do not want to use the Log module, you can also follow the instructions in that thread:

Regards,

Arthur

Other wireless technologies forum