CC2340R5: How to enable logging in 9_11_00_18 SDK without UART Port

Hello Megh,

Could you clarify for me which specific UART pins are consumed, and which UART capable pins are not consumed in the HW?

Thanks,
Alex F

Hi Alex,

Thanks for the swift response. I need to check this with customer. But are you suggesting dynamically changing the UART pins while debugging. Do you have any example implementation that I can share with customer?

Regards,
Megh     

Hello Megh,

That is a possible option, though what I was getting at is that there are multiple pins that we could use as the UART RX/TX (not just two); so if some UART capable pins are free we could try to use them.

Thanks,
Alex F

Can you please share any application implantation example on that?

Hello Megh,

I cannot, though it should be easy for them to first find the other UART pins on their device that are available and then set Sysconfig to use the new pins instead of the old pins.

Thanks,
Alex F