This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2571 Certification Testmodes

Other Parts Discussed in Thread: CC2571

Looking at the CC2571 device datasheet, I do see the Test Mode (RADIO_CW_INT_ID and RADIO_CW_MODE_ID), but to my understanding this only is used for generating the carrier wave unmodulated.  How do I configure this ANT Network Processor to emit a modulated carrier signal for RF certification?

I have also checked the technical resources without any luck. 

Any assistance is greatly appreciated.



  • Hi,

    Most customers have just used the unmodulated signal generated by CW mode for RF certification. If you do require a modulated RF payload for your certification, you may just open a broadcast channel with the payload, channel period, RF channel and tx strength you require.

    Best regards,