Tmp006 i2c interface with Rf430frl152h EVM

MD NAHIDUR RAHAMAN

Other Parts Discussed in Thread: RF430FRL152H, TMP006, TRF7970A

Hi,

I am new to the MCU and I2C programming. I have rf430frl152h EVM board and I want to interface TMP006 by i2c. I download rf430frl152h sensor hub project but I really don’t understand how to modify.

Please I need help.

Thank you for help.

Sincerely,

MD NAHIDUR RAHAMAN

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/667/RF430FRL15xH_5F00_Projects.7z

over 10 years ago

0 Mike Pridgen over 10 years ago

TI__Mastermind 22725 points

Hi,

I moved your post to the NFC forum as they will be better able to support you.

Mike

0 Josh Wyatt over 10 years ago in reply to Mike Pridgen

TI__Guru* 91206 points

MD -
can you confirm here that you first referenced section 2.3.3, then section 4.2 & 4.4 (for overview) then for details, section 5.1 (www.ti.com/.../slau607.pdf) to use the Sensor Hub boosterpack with the EVMs, just to start, before you modify anything in code? I think the GUI will give you options to change things around enough perhaps first.

or are you past the introductory demo steps?

thanks!

0 MD NAHIDUR RAHAMAN over 10 years ago in reply to Josh Wyatt

Intellectual 275 points

Hi Josh,
Thank you for reply. Actually i dont have boosterpack. I have only Rf430frl152h evm ,Tmp006 and TRF7970A EVM. Now i am planing to connect Tmp006 externally with rf430frl152h evem. Finally I want to debug program through MSP FET to run tmp006. Thats why i need to modify boosterpack I2C example.

Thank you

0 Alex K. over 10 years ago in reply to Josh Wyatt

TI__Expert 7820 points

Check this TI design out: http://www.ti.com/tool/TIDM-SMBUS (go to software section) this has C code that should be portable to the RF430FRL15x2H.

Other wireless

Other wireless technologies forum

Tmp006 i2c interface with Rf430frl152h EVM