I recently purchased a NFC-DATALOGGER-EVM board to evaluate using NFC for a project. I also have an ACS122U reader which seems to be one of the most common USB card reader on the market. I am trying - so far unsuccessfully - to send the commands to set time and date etc to the nfc logger by modifying the code samples supplied with the ACS122U SDK. I'm wondering if anyone else has been down this path before me and has managed to communicate with the NFC-DATALOGGER-EVM using the ACS122U from a Windows environment, and would be willing to share some source code, or give me some tips.
The precompiled sample programs provided in the ACS122U SDK will connect to the nfc logger and will read its status, but they don't have the flexibility to send time and date commands. The examples provided with source code can see the ACS reader, but just give errors when I place the NFC-DATALOGGER-EVM on the reader. I'm working on resolving this, but in the mean time would love to hear from anyone who has successfully configured the logger and downloaded the logged data from the NFC-DATALOGGER-EVM to Windows.