• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 10 subscribers
  • Views 477 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2650EMK: TELEC certification for CC2650EMK-7ID

Yuta Kurimoto
Expert 8260 points
Part Number: CC2650EMK
Other Parts Discussed in Thread: CC2650, CC2640, CC2650MODA, BLE-STACK, CC2640R2F

Hello team,

I'm Yuta Kurimoto FAE from TIJ.

Q. Is the CC2650EMK-7ID certified by TELEC? Do you have any plan to get the certification in future?

*TELEC is Telecom Engineering Center, the Japan Amateur Radio Development Association

Thanks,

Yuta Kurimoto

  • 0
    TI__Guru** 105180 points
    Hello Kurimoto-san,

    As noted in the "How to Certify Your Product" article on the BLE wiki, the CC2650EMK-7ID is a evaluation module and thus not certified to any regulatory standard. The CC2650MODA module, which uses a CC2650 in the 5x5 QFN package, is pre-certified to a number of regulatory standards as noted in the respective data sheet, including ARIB STD-T66 (Japan). If you are doing your own layout with the CC2650/CC2640/CC2640R2F, you can use the Modem Test HCI Vendor Specific APIs in the BLE-Stack SDK to preform the required AIRB/TELEC testing.

    Best wishes