CC2545: there are some problems in simulation debugging.

WU YISYUAN

Part Number: CC2545

Hello,

according to TI routine, there are problems in simulation debugging. How to set it?
When debugging step by step, it suddenly can't stop.
the issue as below:

thanks.

over 5 years ago

0 IUsedToBeARealPerson (M-W) over 5 years ago

TI__Guru 58425 points

Hi Wu,

Looks like you are having issues in the code causing a crash. Have you tried to single step over the code (and into it) to find at what point you are messing up the stack pointers?

0 IUsedToBeARealPerson (M-W) over 5 years ago in reply to IUsedToBeARealPerson (M-W)

TI__Guru 58425 points

Hi Wu,

Have you looked further into this?

0 IUsedToBeARealPerson (M-W) over 5 years ago in reply to IUsedToBeARealPerson (M-W)

TI__Guru 58425 points

Closing the thread due to inactivity. If you are still seeing the issue, feel free to continue posting here or start a new related thread using the "Ask related question".

Other wireless

Other wireless technologies forum

CC2545: there are some problems in simulation debugging.